Contact

Cambustion
J6 The Paddocks
347 Cherry Hinton Road
Cambridge
CB1 8DH
United Kingdom

Tel: +44 1223 210250
Fax: +44 1223 210190
Email: cambustion@cambustion.co.uk

Engineering Services

Cambustion has extensive experience in the development and testing of diesel emissions systems.

Our in-house, high specification engine and vehicle test facilities and extensive instrumentation are an excellent platform for rapid development.

Previous diesel projects have included:

ECU recalibration for optimised emissions performance (including particulate filter and NOx trap regeneration)
Evaluation and development of exhaust after treatment including oxidation & particulate filter systems

Instruments

The HFR500, CLD500 and NDIR500 ultrafast gas analysers provide measurement of Hydrocarbon, NO/NO_x and CO/CO₂ on millisecond timescales for engine and emissions research & development.

The CSV500 system is a unique high speed in-cylinder sampling system, which extends the capabilities of Cambustion ultrafast gas analysers to allow in cylinder measurements over a wide range of engine operating conditions/narrow crank angle window. Typical applications include measurements of in-cylinder residuals, transient EGR measurement and the development of both HCCI and GDI engines.

Cambustion’s latest product, the Diesel Particulate Generator offers a solution to the increasing requirement for Diesel Particulate Filter testing. Traditional techniques rely on engine dynamometer testing, which is both expensive and time consuming. The DPG offers a standalone diesel fuelled particulate generator which controls temperature, fuel & air flows to yield repeatable particulate output. It is capable of loading DPFs while monitoring the backpressure, and if required regenerating DPFs in situ.

The Cambustion DMS500 Fast Particulate Spectrometer gives size spectrum measurement from 5 nm up to 2.5 micron with the fastest time response available, for applications such as engine calibration and Diesel Particulate Filter development.

The DMS50 Fast Particulate Spectrometer offers similar data output to the DMS500, with the added flexibility of a mobile 12V powered package. Applications are similar, with the possibility for in-vehicle studies. (Size range 5nm to 500nm)

Please contact us for further details.